|HHCC Accession No. 2006.173||HHCC Classification Code: 16.01-6|
An early 20th century, 25 cycle, repulsion induction motor with historic innovative, first generation, vibration isolating motor mounts, a significant step in helping to reduce the noise level in the canadian kitchen, resulting from the introduction of motorized machinery, built in Canada for Kelvinator’s cabinet refrigerators introduced in the early 1930’s, Wagner, Circa 1932.
Image Gallery (2 Images)
16.01 Electric Motors - Single Phase, Repulsion Induction and Repulsion Motors
Wagner Electric Mfg. Co. of Canada Ltd., Div. of Sangamo Co., Ltd. Leaside Ont.
YL22B110K128, Type SAR
12 x 8 x 8’h
Exhibit, education, and research quality, illustrating the engineering and construction of an early, Canadian made FHP motor for a Canadian refrigerator, with vibration insulating base.
From York County (York Region) Ontario, once a rich agricultural hinterlands, attracting early settlement in the last years of the 18th century. Located on the north slopes of the Oak Ridges Moraine, within 20 miles of Toronto, the County would also attract early ex-urban development, to be come a wealthy market place for the emerging household and consumer technologies of the early and mid 20th century.
This artifact was discovered in the 1950’s in the used stock of T. H. Oliver, Refrigeration and Electric Sales and Service, Aurora, Ontario, an early worker in the field of agricultural, industrial and consumer technology.
With original shop tag, T.H. Oliver, Refrigeration and Electric Service, marked ‘salvage ‘..’
Type and Design:
Early 20th century, heavy duty, repulsion induction, communtating motor, Early form of inherent overload protector with automatic reset Centrifugal brush lifting, armature short circuiting mechanism 1/6 HP Dual voltage, 110-220 volts Bronze sleeve bearings [oil well covers not included] All steel ferro-magnetic body Steel slotted base plate.
Early 4 point, innovative, vibration isolating motor mounts With original shop tag, T.H. Oliver, Refrigeration and Electric Service, marked ‘salvage ‘..’
Control and Regulation:
Targeted Market Segment:
An artifact of Canadian history telling many stories of life and times, Canadian technological innovation, dissemination and popularization of technology for the Canadian home: An early Canadian made FHP motor for an early Canadian refrigerator manufacturer, marking the optimism of the times, the capital investment made, in spite of a period of marked economic depression
A pioneering step in quieting the Canadian kitchen. The 4 point, rubber vibration insulating base would be an historic step of significant proportion in reducing noise in the kitchen, which followed the introduction of electro-motive powered machinery into the home. It would be the first step in an evolutionary sequence which would result, in the complete disappearance of the noisy, hazards, FHP motor, embedding it within the refrigeration system itself, the hermetic refrigeration motor compressor. [see examples classification code 4.01] [see also Note 1] Part of the historic movement to unitize and package the mechanical refrigeration systems, to be marketed to the Canadian home owner - with all its piping, motor, compressor, valving and so forth. Manufactures understood that the popular acceptance of the technology by homeowners, would increasingly depend on making this mechanical wonder not only quieter, but more reliable and repairable, independent of local highly skilled tradesman. The packaged, factory ready refrigeration replacement system was seen as the answer, although not altogether successful in the earliest attempts of which this motor was part ‘ See Reference 12.
Repulsion induction motor technology was above all a marvel of its time, a technology born of both science and the consumer market place, a classic formula for the innovation and diffusion of popular technology, throughout the balance of the 20th century and on in to the 21st. Scientifically, the work of Faraday and many others laid much of the theoretical foundations for electromagnetic devices, the marvel of the early 20th century [much in the same way digital devices became the marvel of the early years of the 21st]. The wonders made possible by alternating current energised, rotating magnetic fields and the electric and magnetic circuitry that made them possible would soon be exploited by those interested in their application in applied electro-motive technology, including Steinnmetz and others. [See References especially #I, 2, and 5] See also ID# 296
See also notes ID# 296
Not-with-standing a major depression and two world wars the first half of the 20th century was a period of exceptional ferment in the development and popular dissemination of FHP electric motor technology. Associated with the development were a number of driving forces, mutually supporting and interacting: Scientifically, the theoretical ground work for development of an astonishing array of electrical and electro-magnet devices had been laid by the early years of the 20th century, through the efforts of Faraday and Steinnmetz, among many others, Technologically, the work of Thomas Edison, among others, laid the foundation stones on which urban and rural electrification would proceed, enabling an new era in human experience, favoured with consumer goods and services, previously unimagined,
Economically, a favourable climate for capital investment in manufacturing capacity, methods and materials emerged, part of North America’s second industrial revolution, Socially and culturally the consumer society was born, nurtured by a pent up demand for an easier, more comfortable, pleasurable lifestyle, and the sense that 20th century electrical and electro-motive technology might be able to help. The FHP electric motor, engineered for 110 volt, single-phase house current, revolutionized life in the Canadian home. It enabled an astonishing list of appliances and labour saving devices. The revolution would take place in an astonishingly short period of time - for much of urban Canada much less than a decade. The electro-mechanical mechanization of the Canadian home was accomplished for much of urban Canada by the late 1930’s. But the early 20th century wonders of household mechanization would be dependent , in turn, on household ‘electrification’ Between them electrification and electro-mechanical mechanization changed everything. Almost over night it altered what Canadians do in the course of their day, how they live and their expectations of what their world had in store for them - in labour saving devices, devices of convenience, health and safety. The fractional horsepower electric motor [FHP] became an ubiquitous part of the Canadian household by the mid 1930’s. Cyril Veinott reported, December 1938:
‘Practically every electrified home today makes use of one or more fractional horsepower motors. This kind of motor may be used in a washing machine, refrigerator, vacuum cleaner, clock, oil burner, hair drier, room heater, sewing machine, razor, health machine, fan, air conditioner, stoker, ironed, floor waxer, or food mixer. In industrial use, the number of useful tasks performed by fractional horsepower motors is legion. In the United States alone, the value of fractional horsepower motors sold amounts to approximately $50,000,000 annually.’ See reference #1
Similarly, more than half a decade earlier Daniel Braymer had commented on the proliferation of this mind and life changing technology for home electro-mechanization. He observed that what had made it all possible was the invention of single phase alternating current motor, in a number of subtypes, small quiet, self starting, reliable and affordable motors for the home, motors which were compatible with the rapid standardization of single phase, alternating current, electrical distribution systems then spreading across north America. See reference #2 Among the types of single phase alternating current motors which quickly populated the Canadian home were: repulsion induction [see Group 16.01] for heavy duty, high starting torque applications such as refrigeration appliances; capacitor start [see Group 16.02] for advanced high torque applications, requiring quiet operation; split Phase [see Group 16.04] for light duty low starting torque applications; and shaded pole [see Group 16.04] designs for small devices such electric fans. The FHP single phase induction motor, often unobtrusive, out of sight in a dark corner, has, none-the-less, been a principle foundation stone on which Canadian, popular consumer and household technology has evolved, throughout the 20th century and into the 21st - a driving force of profound, typically un-recognized, social, cultural and economic change [See reference 6]. Electro-motive technology [the FHP motor], along with electric and electronic communications technology [the telephone and broadcast radio] would invade the Canadian home starting in the 1920’s. Throughout the balance of the 20th century these technologies would trigger a vast, new, popular consumer culture, a ‘popular technological revolution’. Yet, simply because technology has so shaped the Canadian reality, it has also shaped much profound Canadian though about the technological experience, its meaning and significance for humanity. Included among the works of Canadian writers with an international reputation are: Arthur Kroker, George Grant, Ursala Franklin, Heather Menzies, among many others [See references 7, 8, 9, and 10]. From the vantagepoint of the 21st century noted Canadian writer Jane Jacobs asks, ‘Now we stand at another monumental crossroad, as agrarianism gives way to a technology-based future. How do we make this shift without losing the culture we hold dear’ [See reference 11]
G. Leslie Oliver, The T. H. Oliver HVACR Collection
HHCC Storage Location:
‘Fractional Horsepower Electric Motors’, Cyril Veinott, McGraw Hill New York, 1948 ‘Rewinding Small Motors’, Daniel Braymer and C.C. Roe, McGraw Hill, 1932 ‘Theory and Application of Capacitor-Start Induction Motors’, G. L. Oliver, Bachelor Thesis ,University of Toronto, Session 1951-52 ‘Modern Refrigeration and Air Conditioning’, Electric Motors, Chapter 7, Andrew Althouse and Carl Turnquist, Goodheart-Wilcox, 1960 ‘A course in Electrical Engineering, Volume II, Alternating Current’, Chester Dawes, McGraw Hill, 1934, Starting single Phase Induction Motors, P. 362. ‘The Fractional Horsepower Motor and its Impact on Canadian Society and Culture’, G. Leslie Oliver, Material History Review, Vol. 43, Journal National Museum of Science and Technology, 1996. ‘Technology and the Canadian Mind, Innis/ McLuhan/Grant’, Arthur Kroker, New World Perspectives, 1984. ‘Technology and Empire’, George Grant, Anansi, 1969, ‘The Real World of Technology’, Ursula Franklin, Anansi, 1993. ‘Fast Forward and Out of Control’, Heather Menzies, Macmillan, 1989 ‘Dark Ages Ahead’, Jane Jacobs, Random House, 2004 ‘Kelvinator Service Manual’, Kelvinator of Canada, January, 1935, P.56
Other styles of early vibration isolation mountings were introduced by Delco, see ID# 298, moving to the axial, torsion mount commonly used to the turn of the century, see ID# 308